Merck 104727 Isooctane for Analysis Emsure® Acs, Reag. pH Eur. 2.5 L
MERCK

Merck 104727 Isooctane for Analysis Emsure® Acs, Reag. pH Eur. 2.5 L

6.148,12 TL
Kategori
KİMYASAL ÜRÜNLER
Stok Kodu
SLV.M.104727.2500
Fiyat
134,88 EUR + KDV
SEPETE EKLE
HIZLI SATIN AL
Karşılaştır
Ürün Bilgisi
Yorumlar (0)
Taksit Seçenekleri
Önerileriniz
Description
Catalogue Number 104727
Synonyms 2,2,4-Trimethylpentane, Isobutyltrimethylmethane, iso-Octane
Description Isooctane
Overview EMSURE® grade solvents are suitable for a broad spectrum of classical lab applications, and are frequently used in regulated and highly demanding lab applications. EMSURE® provides worldwide best and most extensive product specifications. We declare our EMSURE® range to be in compliance with the ACS, with the reagent part of the European Pharmacopoeia (Reag. Ph Eur) and also with the ISO standards.
Product Information
CAS number 540-84-1
EC index number 601-009-00-8
EC number 208-759-1
Grade ACS,Reag. Ph Eur
Hill Formula C₈H₁₈
Chemical formula CH₃C(CH₃)₂CH₂CH(CH₃)CH₃
Molar Mass 114.23 g/mol
HS Code 2901 10 00
Structure formula Image
Applications
Application Isooctane for analysis EMSURE® ACS,Reag. Ph Eur. CAS 540-84-1, EC Number 208-759-1, chemical formula CH₃C(CH₃)₂CH₂CH(CH₃)CH₃.
Physicochemical Information
Boiling point 99 °C (1013 hPa)
Density 0.69 g/cm3 (20 °C)
Explosion limit 1 %(V)
Flash point -12 °C
Ignition temperature 410 °C
Melting Point -107 °C
Saturation concentration (air) 239 g/m3 (20 °C)
Vapor pressure 51 hPa (20 °C)
Solubility 0.56 mg/l
Toxicological Information
LD 50 oral LD50 Rat > 2500 mg/kg
Safety Information according to GHS
Hazard Pictogram(s)



Hazard Statement(s) H225: Highly flammable liquid and vapour.
H304: May be fatal if swallowed and enters airways.
H315: Causes skin irritation.
H336: May cause drowsiness or dizziness.
H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statement(s) P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P240: Ground/bond container and receiving equipment.
P273: Avoid release to the environment.
P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
Signal Word Danger
RTECS SA3320000
Storage class 3 Flammable liquids
WGK WGK 2 water endangering
Disposal 1
Strongly contaminated halogen-free organic solvents: container A.
Safety Information
Hazard Symbols Harmful
Flammable
Dangerous for the environment
Categories of danger highly flammable, irritant, harmful, dangerous for the environment
R Phrase R 11-38-65-67-50/53
Highly flammable.Irritating to skin.Harmful: may cause lung damage if swallowed.Vapours may cause drowsiness and dizziness.Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
S Phrase S 9-16-29-33-60-61-62
Keep container in a well-ventilated place.Keep away from sources of ignition - No smoking.Do not empty into drains.Take precautionary measures against static discharges.This material and its container must be disposed of as hazardous waste.Avoid release to the environment. Refer to special instructions/ Safety data sheets.If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.
Storage and Shipping Information
Storage Store at +5°C to +30°C.
Transport Information
Declaration (railroad and road) ADR, RID UN 1262 , 3, II
Declaration (transport by air) IATA-DGR UN 1262 , 3, II
Declaration (transport by sea) IMDG-Code UN 1262 , 3, II, Marine Pollutant: P
Specifications
Purity (GC) ≥ 99.5 %
Identity (IR) conforms
Colour ≤ 10 Hazen
Acidity ≤ 0.0003 meq/g
Density (d 20 °C/20 °C) 0.691 - 0.696
Refractive index (n 20/D) 1.391 - 1.393
Boiling range (98-100°C) ≥ 95 % (v/v)
Sulfur compounds (as S) ≤ 0.005 %
Readily carbonizable substances conforms
Transmission (between 250nm and 420nm) ≥ 98 %
Al (Aluminium) ≤ 0.00005 %
B (Boron) ≤ 0.000002 %
Ba (Barium) ≤ 0.00001 %
Ca (Calcium) ≤ 0.00005 %
Cd (Cadmium) ≤ 0.000005 %
Co (Cobalt) ≤ 0.000002 %
Cr (Chromium) ≤ 0.000002 %
Cu (Copper) ≤ 0.000002 %
Fe (Iron) ≤ 0.00001 %
Mg (Magnesium) ≤ 0.00001 %
Mn (Manganese) ≤ 0.000002 %
Ni (Nickel) ≤ 0.000002 %
Pb (Lead) ≤ 0.00001 %
Sn (Tin) ≤ 0.00001 %
Zn (Zinc) ≤ 0.00001 %
Evaporation residue ≤ 0.001 %
Water ≤ 0.01 %
Corresponds to ACS, Ph Eur-reagent
Bu ürüne ilk yorumu siz yapın!
Yorum Yaz
Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.
Merck 104727 Isooctane for Analysis Emsure® Acs, Reag. pH Eur. 2.5 L SLV.M.104727.2500
Merck 104727 Isooctane for Analysis Emsure® Acs, Reag. pH Eur. 2.5 L

Tavsiye Et

*
*
*
IdeaSoft® | E-Ticaret paketleri ile hazırlanmıştır.