Merck 109163 Wijs solution for determination of the iodine number c(ICl) = 0.1 mol/l Titripur® 1 L

4.092,27 TL

Kategori

KİMYASAL ÜRÜNLER

Stok Kodu

M109163.1000

Fiyat

94,23 EUR + KDV

SEPETE EKLE

HIZLI SATIN AL

Karşılaştır

Merck 109163 Wijs solution for determination of the iodine number c(ICl) = 0.1 mol/l Titripur® 1 L
Catalogue Number	109163
Synonyms	Iodine solution acc. to Wijs

Product Information
HS Code	3822 00 00

Physicochemical Information
Density	1.06 g/cm3 (20 °C)
Flash point	40 °C
pH value	<1 (H₂O, 20 °C)

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H226: Flammable liquid and vapour. H314: Causes severe skin burns and eye damage.
Precautionary Statement(s)	P210: Keep away from heat. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
Storage class	3 Flammable liquids
WGK	WGK 1 slightly water endangering
Disposal	12 Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.

Safety Information
Hazard Symbols	Corrosive
Categories of danger	flammable, corrosive
R Phrase	R 10-35 Flammable.Causes severe burns.
S Phrase	S 26-36/37/39-45 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Storage and Shipping Information
Storage	Store at +15 °C to +25 °C.

Transport Information
Declaration (railroad and road) ADR, RID	UN 2789 , 8 (3), II
Declaration (transport by air) IATA-DGR	UN 2789 , 8 (3), II
Declaration (transport by sea) IMDG-Code	UN 2789 , 8 (3), II, Segregation Group: 1 (Acids)

Specifications
Amount-of-substance concentration	0.1000 mol/l
The concentration of this volumetric solution was determined with sodium thiosulfate standard solution (article number 1.09147) standardized against volumetric standard potassium iodate (article number 1.02404). The determined titer at 20°C was 1.000 with an expanded measurement uncertainty of ± 0.004 (k=2 coverage factor for 95% coverage probability). The certified value is traceable to primary standard NIST SRM 136f (NIST: National Institute of Standards and Technology, USA) by means of volumetric standard potassium iodate, measured in the accredited calibration laboratory of Merck KGaA, Darmstadt, Germany in accordance to DIN EN ISO/IEC 17025.

Specifications

Amount-of-substance concentration

0.1000 mol/l

The concentration of this volumetric solution was determined with sodium thiosulfate standard solution (article number 1.09147) standardized against volumetric standard potassium iodate (article number 1.02404). The determined titer at 20°C was 1.000 with an expanded measurement uncertainty of ± 0.004 (k=2 coverage factor for 95% coverage probability). The certified value is traceable to primary standard NIST SRM 136f (NIST: National Institute of Standards and Technology, USA) by means of volumetric standard potassium iodate, measured in the accredited calibration laboratory of Merck KGaA, Darmstadt, Germany in accordance to DIN EN ISO/IEC 17025.

Bu ürüne ilk yorumu siz yapın!

Yorum Yaz

Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.

Ürün resmi kalitesiz, bozuk veya görüntülenemiyor.

Ürün açıklamasında eksik bilgiler bulunuyor.

Ürün bilgilerinde hatalar bulunuyor.

Ürün fiyatı diğer sitelerden daha pahalı.

Bu ürüne benzer farklı alternatifler olmalı.

Merck 109163 Wijs solution for determination of the iodine number c(ICl) = 0.1 mol/l Titripur® 1 L

Tavsiye Et